Pack of Electric locomotives CHS2 v1.0 for TS 2018

Pack of Electric locomotives CHS2 v1.0 for TS 2018
Train Simulator
0 0
Description about Pack of Electric locomotives CHS2 v1.0 for TS 2018:

Pack of Electric locomotives CHS2 v1.0 for Train Simulator 2018 game.

We present to you a new Fashion pack of Electric locomotive CHS2 for the popular RailWorks game. Very high quality model and train envelope in the game. In the locomotive, the sequential launch of devices and auxiliary machines, a set of controller positions, shunting, and a current limitation are implemented. Implemented CLUB-U.
The brake system is currently under development. Now the locomotive has seven different repaints.
For correct operation of CLUB-U in scripts, a special marker is necessary, which is included in the latest version of the Russian signaling system.

I. How to start the locomotive:
1.Turn on the "Battery" toggle switch on the rear of the cab (U key)
2.Set the toggle switches "Disconnect 1" (F) and "Disconnect 2" (Ctrl + V) to the rightmost position
3. Turn on the toggle switch "Front current collector" (P), wait for the voltage readings in the CS. Turn on the tumbler "Pantograph Rear" (Shift + P)
4.Turn on the "Control key" toggle switch (Y)
5.Set the "Reverse" switch to the "Forward" position (W)
6. Press the BW button. (Z)
7. Check the inclusion of BV on the indicator.
8.Set the "Reverse" switch to the "Neutral" position. (S)
9.Set the toggle switches "Compressor 1 (Shift + H) / Compressor 2 (Shift + N)" to "Auto" (Extreme left position).
10. Turn on the equipment "CLUB-U" (Ctr + Shift + B)
11.Turn the EPC key (C)
The locomotive is started.

II. Entering data into the CLUB-U system
1. Press the button and enter the number of the driver
2. Press the up arrow and enter the number of the train
3. Press the up arrow and enter the length of the train in the axes
4. Press the up arrow and enter the length of the train in the wagons
5. Press the up arrow and enter the mass of the train

III.The beginning of the movement:
1.Turn on the "Fans" toggle switch (G).
2.Turn on the "EPT" toggle switch (Ctr + Shift + E)
3.Include toggle switches (J, K)
4. Turn the "Projector" switch to the dull day or bright at night (Only from the control panel)
5.Set the "Reverse" switch to the "Forward" position (W)
6. Release the locomotive brake ([)
7.To briefly put the handle of the crane operator in the first position (;)
8. Select the first position by the driver's controller (A)
9. After reaching 10 km / h turn off the toggle switch "Forward collector" (P) "


The model for converting to Train Simulator 2017 is courtesy of Romoy
The initial model of the locomotive and cab: Combine
Photographic material: vl92m
Modification of models, baking, etc.: Roma
Convert to Train Simulator 2017:
The external model is HellishFire;
Cabin and textures for the exterior model - Linx,
Scripts (Traction characteristics, braking system, CLUB, etc.) - i2GR.
Repainting: RAILSIMRUS

How to set the fashion in the Train Simulator: for RailWorks add-ons are installed using the built-in Utilites Add-ons Manager, located in the root folder of the game.
Press the large Install button (SET) which is to the right, and specify a location or rpk rwp-archive.
If the file is not packed in such a file, then copy the Assets folder to the root of the game and confirm the replacement.


Tested on game version v60.4c

скачать dle 12.0
Pack of Electric locomotives CHS2 v1.0 for TS 2018

Download Links – Policy & Disclaimer

This document refers to links to third-party content/website, from both our website(s) and our official Social Media pages. External links are selected and reviewed when a page/post is published. However, we are not responsible for the content of external websites. If you would like us to remove a link to your website from NHS Choices, please Contact us (Admin) Note that unless you have a legal right to demand removal, such removal will be at our discretion.

Share / Download Pack of Electric locomotives CHS2 v1.0 for TS 2018:

  • bowtiesmilelaughingblushsmileyrelaxedsmirk
Enter the code from the image:*
reload, if the code cannot be seen